View Single Post
  #1  
Old 07-14-2016, 07:24 AM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,393
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
KMG grinder converted to direct drive

Gave the old girl a brand new lease on life! Actually pretty simple, after Matt shared the images of his conversion. I personally like the rubber covered drive wheel better then a solid metal wheel...... less slip on the belt. All I can say is there is a HUGE difference in how the machine grinds and feels versus the belt drive.

Essentially all I did was remove the to "stanchions" that held the pillow blocks, drive shaft, and pulley, and using the existing bolt holes and bolts, drilled and threaded the new motor adapter plate, and simply bolted it to the KMG's frame...... you just have to be cautious of the spacing to ensure you can align all the wheels when the motor is in place/new drive wheel is installed.

The motor I chose is: http://www.electricmotorwholesale.com/LEESON-113890/ I've been buying motors and controllers from these folks for several years.... they always seem to have the best prices, and are very helpful when you need tech support/advice.







__________________
WWW.CAFFREYKNIVES.NET

Caffreyknives@gmail.com

"Every CHOICE has a CONSEQUENCE, and all your CONSEQUENCES are a result of your CHOICES."
Reply With Quote