The Knife Network Forums : Knife Making Discussions

The Knife Network Forums : Knife Making Discussions (http://www.knifenetwork.com/forum/index.php)
-   Tool Time (http://www.knifenetwork.com/forum/forumdisplay.php?f=13)
-   -   anvil stump (http://www.knifenetwork.com/forum/showthread.php?t=69051)

loneronin 07-24-2020 04:16 AM

anvil stump
 
1 Attachment(s)
the original stump of my anvil was too big in diameter. uncomfortable to move and above all it did not allow me to be as near to the anvil as I like except by placing the anvil itself on the edge of it rather than in the center. so I decided to put it aside for now and use the old stump of my "ASO". I took two pieces of pallet frame and cut them copying the shape of the base of the anvil obtaining two stop blocks which I nailed to the center of the new stump. now I can move it more easily and can get closer to the anvil when I forge. it is perfectly stable and the anvil cannot move at all.

if you are interested here is the link to the video:
https://youtu.be/NHkdosG3-ZQ

:)


All times are GMT -5. The time now is 10:00 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved