The Knife Network Forums : Knife Making Discussions

The Knife Network Forums : Knife Making Discussions (http://www.knifenetwork.com/forum/index.php)
-   The Display Case (http://www.knifenetwork.com/forum/forumdisplay.php?f=5)
-   -   First one (http://www.knifenetwork.com/forum/showthread.php?t=68857)

Tex65 08-10-2019 09:18 AM

First one
 
1 Attachment(s)
First one that wasn’t intended to be a practice piece.

Don Robinson 08-10-2019 10:58 AM

Nice job. Keep it up! :D

Rasmus Kristens 08-10-2019 04:41 PM

Nicely done! I like it.
One small comment at the ricasso. A qtip with acetone is really good at getting the epoxy removed that is squeezed out. I also learned to keep watching for more epoxy getting squeezed out, since it expands a little while curing.
Have you made a sheath yet? Working with leather is really fun!

Tex65 08-11-2019 05:11 AM

Thanks for the tip. Just did the handle on my next one and same problem. Gonna have to work on keeping the epoxy cleaned up.

argel55 08-11-2019 09:08 AM

get a 3/16 brass rod and sharpen to a chisel. it will remove epoxy and not scratch your blade.


All times are GMT -5. The time now is 07:02 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved