The Knife Network Forums : Knife Making Discussions

The Knife Network Forums : Knife Making Discussions (http://www.knifenetwork.com/forum/index.php)
-   Knife Photography Discussion (http://www.knifenetwork.com/forum/forumdisplay.php?f=26)
-   -   The old rig brought out (http://www.knifenetwork.com/forum/showthread.php?t=68465)

M&J 10-23-2018 10:02 PM

The old rig brought out
 
3 Attachment(s)
Didn't want to lug the monolight and softbox this time out. An easy setup and breakdown for small shoots is nice. Remembering the old days brought out the 40x40" 1 stop diffuser and 750W hot light. The heat was to uncomfortable to work with. This time applied the two speedlights to see what could be done. Was pleased and realized how soft a light this results in. A bit flat though for knives, guns and such this works well. This what Jim Weyer had suggested when I started. Easy, economical with good results.

The speedlights made this really nice without any heat to deal with. As well those little flashes are easily moved so experimenting was a breeze.

http://www.michaelfongphotography.co... 2018-7124.jpg

http://www.michaelfongphotography.co... 2018-4638.jpg

http://www.michaelfongphotography.co... 20, 2018-.jpg

M&J 11-30-2018 11:15 PM

1 Attachment(s)
Was doing some work up shots for practice today... Always a challenge to get what is in mind in the real capture. Almost there... want the fade on the bottle to taper more. Know how to get it, I ran out of light stands to hold stuff.

http://www.michaelfongphotography.co... 2018-5820.jpg

jimmontg 12-01-2018 07:03 PM

Never thought to use a cloth sheet to diffuse the light. Man you make some pretty knives.

M&J 12-02-2018 02:49 PM

1 Attachment(s)
Thanks Jim.

Bathtub curtains, white trash bags, white nylon fabrics, acrylic lighting panels and stretched artist canvas...work well too. The photo supply places love to mark up the diffusion materials. One can go to a fabric shop and get them very reasonably. Then build a frame from PVC irrigation pipes and fittings. Add in a single speedlite and a remote trigger for ~$100.

This time of year getting a rig to photograph their own pieces is easier on the wallet.

I use these triggers: (The camera has to have a hot shoe and manual capability.)
https://www.bhphotovideo.com/c/produ...emote_for.html

Lightstands:
https://www.amazon.com/Neewer-Photog...i+light+stands


Youngnuo flashes:
https://www.bhphotovideo.com/c/searc...yongnuo+flash&

I would suggest an older model flash from the big players relative to your rig : Nikon, Canon, etc. Third party units like Yongnuo, Godox, Flashpoint, Orlit, etc are budget minded pieces that have nice features. Not sure on the reliability. I have a Canon 580EX circa 2006 that has been great, that's in the travel kit.

This Jim Sornberger flipper was shot with two-speedlites: Main above and then the second for shadow fill. Same as the Mel Nishiuchi higher in the thread.

http://www.michaelfongphotography.co...20, 2018-3.jpg

M&J 01-06-2019 04:04 PM

1 Attachment(s)
The old Speer "flying ashtray".

Different finesse with this. Wanted to get the hollow point illuminated and wasn't inclined to get another speedlite out. Took the ambient exposure specs then dialed the flash back 1.5 stops.

M&J 01-11-2019 06:34 PM

A delayed photo of some recent pieces
http://www.michaelfongphotography.co... 2019-7819.jpg

M&J 01-12-2019 03:56 PM

Barry Dawson's neck knife taken with the rig:

http://www.michaelfongphotography.co... 2018-3151.jpg

A pretty similar flatish look. Have also used a mini softbox to shoot through the diffuser which softens it more. The bare speedlites can bring a bit better contrast when dialed up.

M&J 01-12-2019 11:38 PM

Two more

Bob Hajovsky "Bob Sky knives" semi skinner, nickel silver bolsters with buffalo horn handle scales.

http://www.michaelfongphotography.co... 2019-6458.jpg

Russel Easler MOP "swinger"

http://www.michaelfongphotography.co... 2019-6441.jpg

M&J 01-15-2019 03:11 AM

Shun Fujikawa Maki-e folder:

Shot this with the Canon M3 and 50/1.4.

http://www.michaelfongphotography.co... 2019-7906.jpg

M&J 01-16-2019 04:14 PM

Jim Martin lockback. Haven't done many of these composite mutli view shots so was good practice.

http://www.michaelfongphotography.co... 15, 2019-.jpg

M&J 03-08-2019 11:43 PM

More practice with this one:
http://www.michaelfongphotography.co..., 2019-3-2.jpg

M&J 04-27-2019 06:32 PM

1 Attachment(s)
I like using the walnut background, doing the composites is easy.

M&J 05-06-2019 04:36 PM

1 Attachment(s)
An older Stan Fujisaka folder
http://www.michaelfongphotography.co...08, 2019-2.jpg

M&J 05-25-2019 10:48 PM

1 Attachment(s)
Another one of Stan's with Jim Sornberger's engraving. This was made for the 1998 Guild Show in Las Vegas.

This is not a composite shot. BTW

http://www.michaelfongphotography.co... 2019-0671.jpg

Miss seeing Stan at the shows. :rip::(

M&J 05-26-2019 09:44 PM

1 Attachment(s)
Getting some practice in. I like the floating feel and have figured out how I want to do them on capture. This one was shot on glass.

Since I have this knife back it is my frequent photo subject of choice.

http://www.michaelfongphotography.co... 2019-0613.jpg


All times are GMT -5. The time now is 02:50 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved