The Knife Network Forums : Knife Making Discussions

The Knife Network Forums : Knife Making Discussions (http://www.knifenetwork.com/forum/index.php)
-   The North Carolina Custom Knifemakers Guild Forum (http://www.knifenetwork.com/forum/forumdisplay.php?f=31)
-   -   Looking for a 2X72 grinder for sale (http://www.knifenetwork.com/forum/showthread.php?t=68884)

DPScherer 09-07-2019 04:57 PM

Looking for a 2X72 grinder for sale
 
If anyone has one for sale let me know make and model. Ideally something with a 220 motor and A VFD

DPScherer 09-09-2019 12:17 PM

Guys would this be a good grinder to buy?
Pheer
ph 454 x 10 1.5 hp
2 x 72 belt grinder with 10 " wheel flat platen & tool rest 1 .5 hp motor & kbac 27 d variable speed drive
Price: $1,850.00
Is it just me or have all these grinder prices gone way up in the last year.

jimmontg 09-09-2019 03:42 PM

tTry Pop's, they have a 1 1/2 hp Willmont for $1150, it's single speed and it doesn't say if it has different sizes on the drive motor pulleys.
https://pops-knife-supply.myshopify....lb1000-grinder

DPScherer 09-09-2019 09:00 PM

Interesting , thanks for the reply.

DPScherer 09-09-2019 09:07 PM

Willmont has the worst website i have seen in some time. I hope his grinders work better than his website. Half the pages don't work or are wrong in some way.

DPScherer 09-10-2019 09:03 AM

Is there another website for bladesmiths in NC? This site seems very quiet.

jdale 09-11-2019 01:56 PM

Pheers website still has the labor day sale prices active. I just bought a 454 with a 1.5HP motor kbac 27 d variable speed drive and flat platten for 1500 after shipping. I bought a 10" wheel from ali express for around $50 and will just fabricate an arm for it myself. I am a fan of Pheer grinders. Ive been using one of his really early models for the last 8 years and have only had to replace bearings and a spring.

DPScherer 09-13-2019 09:01 AM

Thanks for the reply, we are looking at Pheer. It is the current front runner.


All times are GMT -5. The time now is 09:11 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved