The Knife Network Forums : Knife Making Discussions

The Knife Network Forums : Knife Making Discussions (http://www.knifenetwork.com/forum/index.php)
-   Knife Making Discussions (http://www.knifenetwork.com/forum/forumdisplay.php?f=6)
-   -   2x72 grinder (http://www.knifenetwork.com/forum/showthread.php?t=64944)

rlp114 03-21-2015 09:29 PM

2x72 grinder
 
I looking in to getting my first 2x72 grinder I'm leaning towards the pheer 454 with 1.5 motor 8 inch wheel and flat platten with vfd it is at the top end of my budget for a grinder. Any one have this machine? If so pros and cons would be helpful in my decision.

dude 03-26-2016 11:12 PM

Pheer grinder
 
I seen one on Craiglist, St. or western Ill.

Rahbeen 06-07-2016 04:46 PM

KMG Grinder for Sale $800 Phoenix Arizona
 
For Sale: KMG#2x72 grinder with#platen#attachment. 1.5#hp#motor. 3#step#pulley#for#motor. 3#step#pulley#for#grinder. Work#rest. Drive#belt. Base#plate. Uses#2"#X#72"#belts. 3#ideal#belt#speeds#of#approx:#900,#1800,#and#3600 #ft/min.#
#1.5#hp#motor#can#run#on#110V#or#220V#AC.##Asking $800. This same grinder retails for $1276 from MFG. Beaumont Metal Works. I used it for about 6 months and just have no time for this great hobby. 602-430-1004 robin@robinlinck.com


All times are GMT -5. The time now is 12:47 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved