The Knife Network Forums : Knife Making Discussions

The Knife Network Forums : Knife Making Discussions (http://www.knifenetwork.com/forum/index.php)
-   The Supply Center (http://www.knifenetwork.com/forum/forumdisplay.php?f=8)
-   -   sheared to length steel supplier? (http://www.knifenetwork.com/forum/showthread.php?t=68963)

Will 01-02-2020 07:43 PM

sheared to length steel supplier?
 
Looking for a supplier of steel, 1084 and 15&20 that is sheared to length. Last batch I got was 1 1/4" wide by 6" long. Perfect for damascus, unfortunately it's been a while and I can't remember where I got it from.

Thanks

jimmontg 01-03-2020 07:07 PM

You can try Alpha knife supply
 
I do believe they might cut it to length, their material comes in just under 12" and 23.5 lengths and they are the only place I know of that sells .160 thick 15N20 almost 3/16 of an inch thick, a piece of 3/16 15N20 forged to a piece of 80CrV2 steel would make for some interesting Damascus. The 80Crv2 steel is just 1084 with a little bit of chrome and 0.20% of vanadium which at the percent will restrict grain growth. It would be hard to mess it up if you just ht like regular 1084.
http://https://www.alphaknifesupply....0-carbon-steel


All times are GMT -5. The time now is 09:22 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved