The Knife Network Forums : Knife Making Discussions

The Knife Network Forums : Knife Making Discussions (http://www.knifenetwork.com/forum/index.php)
-   The North Carolina Custom Knifemakers Guild Forum (http://www.knifenetwork.com/forum/forumdisplay.php?f=31)
-   -   Knife making equipment for sale (http://www.knifenetwork.com/forum/showthread.php?t=68692)

TCT-knives 03-07-2019 04:30 PM

Knife making equipment for sale
 
I recently cleared out a shop from a retired knife maker. What I have I'm selling at extremely reasonable prices. What I have left is listed below

BaderIII with variable speed VFD, nice flat platen with tool rest, 8" wheel on arm.

Bader single speed 220v, comes with flat platen

Kalamazoo 1" grinder with rest

Metal turning lathe (It is not on a pedestal and the belts need a little attention. I have the tail stock, tool changer, 4 jaw chuck and several other ancillaries) This is a great project for someone who likes to tinker. It is an Atlas, approximately 12" swing

24" heat treat oven by Good Kilns (Paragon equivalent) runs off 220v. Like new condition. It has no electronic controller but a dial and two temperature gauges. I took it to 1925 deg and shut it off.

Arbor press, used for detents or kydex rivets, ect. New condition

john carer 03-08-2019 01:03 AM

Coupon & Discount Codes
 
You can buy weaponary at dirt cheap using Palmetto state armory discount codes!
they have coupon and promo codes for over 10000+ brands.

Branson1369 03-08-2019 06:57 PM

I am new to knife making and blacksmith is and looking for equipment and interested in what you have and pricing

Dave

Branson1369 03-08-2019 06:59 PM

I am new to knife making and blacksmith is and looking for equipment and interested in what you have and pricing

Dave

catbro6166 04-25-2019 04:16 AM

I'm trying get my own forge going if you still have anything would some details be possible pics location stuff is at I lu e in Gastonia NC.

Blade55 06-15-2019 10:58 AM

New to this site and probably know the answer, but here goes anyway. do you still have the belt grinder or have you sold all your items listed?


All times are GMT -5. The time now is 06:20 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved