Here are two that I just finished.The one on the right is open to show off the handle.Let me know if there is any interest as I might make some for sale.Dave



http://www.imagestation.com/picture/sraid27/pe1fe537197cddb3b59795a44e9bbc7bd/fe2dc343.jpg

Dave, do they have flaps and if so how are they held closed? Also are you machine sewing or like me all hand done?

Regards from Australia.

Neil,No flaps just friction.Sheaths are lined with suede.I wrap the knife in cellophane,Dampen the sheath and wet mold it.Remove knife and let dry.I have one customer who has had his for over a year and still holding tight.All my sheaths are hand sewn.Dave

do you make then to be worn in the horizonal with a flap.

Lionel,never tried but it would not be that difficult.I make mostly fixed blade sheaths.These two sheaths were designed to be somewhat universal.If you wanted a molded type fit, I would need the knife.If your not concerned about a tight molded fit then I would still want at least some accurate measurements to make a blank,which would cost a little more.Hope this helps.Dave

want to see more sheaths-
www.imagestation.com/album/?id=4292307467 (http://www.imagestation.com/album/?id=4292307467)

Will get back to you after the first of the year. will want a molder sheath.