We're slowly wrapping up the Newbie KITH, so I thought it would be good to get some pics up of as many of these knives as I can. I must say, everybody turned out some very nice knives for the limited amount of experience as there is amongst this group.

I will update/add pictures as they are available.

So, for your viewing pleasure, the knives. . .


. . .from Zimba (Lars) from Sweden

Steel type - RWL-34
Blade length - 3,54
overall length - 8,46
handle material - Red Malle burl
type of grind (i.e. hollow, convex, flat, etc.) - Flat grind sandblasted
Sheath - Wet molded and dyed veg tanned leather


http://i3.photobucket.com/albums/y86/wetland_bird/ZimbaKITHknife.jpg


. . .from SBuzek

Blade length: 5 inches
OAL: 9-7/8 inches
Bolsters: Dovetailed brass
Handle: Mahogany
Blade steel: 154CM
Heat treat: TKS w/cryo
Sheath: pouch style by Maker


http://i3.photobucket.com/albums/y86/wetland_bird/SBuzekKITHknife.jpg

. . .from Ranger1

http://i3.photobucket.com/albums/y86/wetland_bird/Ranger1KITHknife.jpg

. . . from Randy Havard

Blade:4 x 1 1/8 x 1/8 inches
Steel: Alabama random damascus
Overall length: 8 1/8 inches
Handle: Spalted micarta by Lloyd Harner
HT: by Me using a forge and peanut oil for quench


http://i3.photobucket.com/albums/y86/wetland_bird/RandyHavardKITHknife.jpg

. . . from jdm61

blade; 4.5 inch forged 1075, flat gind with convex edge, differentially heat treated
guard and pin: 300 series stainless
handle: Ozark black walnut with boiled linseed oil finish
sheath: border stamped Treestump Leather pouch

http://i3.photobucket.com/albums/y86/wetland_bird/jdm61JoeMandtknife.jpg

. . . from drac

CPM154
About 2 1/2" if I remember correctly
About 6" overall
Mother of pearl with vulcanized spacers & gold plated screws
Flat ground
I HT'd to 60 R
Twisted rope file work on hilt


http://i3.photobucket.com/albums/y86/wetland_bird/dracKITH.jpg

. . . from dmarx

ATS-34 heat treated by TKS
3 3/4" cutting edge; 8 3/4" overall ; hollowground
Stabilized spalted Pecan; hand made sheath


http://i3.photobucket.com/albums/y86/wetland_bird/dmarxknifepic2.jpg
. . . from Dave Ruhlig

http://i3.photobucket.com/albums/y86/wetland_bird/DaveRuhligKITHknife.jpg

. . . from Armory414 (Nathan)

Steel: ATS-34
Blade length: 3 inches
OAL: 7 1/8 inches
Handle: Zebra wood with rosewood spacer, brass guard
HT: HT and cryo by TKS


http://i3.photobucket.com/albums/y86/wetland_bird/KITHknife.jpg