wheels for grinder [Archive] - The Knife Network Forums : Knife Making Discussions


The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Tool Time > wheels for grinder PDA View Full Version : wheels for grinder Jim 08-29-2001, 03:13 PM Hi guys, I just found this forum, I am wanting to make me a belt grinder, can you tell me how to find the rubber coated wheels that I see on your grinders. Thanks Jim Bob Warner 08-29-2001, 06:23 PM You can get them from most of the knife supply stores. If you are unfamiliar with the supply stores let me know and I will give you some web sites. Jim 08-30-2001, 12:06 PM Hi Bob, if you could send me some places,to look for the rubber coated wheels,that would be great. Do you need rubber wheel on a belt sander? Thanks Jim MJHKNIVES 08-30-2001, 01:10 PM www.contactrubber.com/home.htm (http://www.contactrubber.com/home.htm) here's another place to try.Good luck. MJHKNIVES 08-30-2001, 01:15 PM www.geocities.com/beaumon...index.html (http://www.geocities.com/beaumontmetal/index.html) here's another. Bob Warner 08-30-2001, 05:29 PM Go to this discussion: pub42.ezboard.com/fcustomknifedirectoryforumfrm19.showMessage?topicI D=270.topic (http://pub42.ezboard.com/fcustomknifedirectoryforumfrm19.showMessage?topicI D=270.topic) There are several links in my message to supply houses and information sources.