|
View Full Version : Powdered metal moldy Jim 02-02-2001, 11:11 PM Hi guys, I'd like to do a little experimenting with some powdered metal, Wootz, mosaic damascas, etc. but I don't know where I could buy the powdered metal. Does anyone have a contac they'd mind sharing? Thanks, Moldy jeffpelz 02-06-2001, 06:02 PM Jim, I don't have a suppliers info, but maybe this MS knifemaker can help you. Ron Newton (501)293-3001. He works with a lot of damascus and powered metals. Jeff peter nap 02-11-2001, 05:55 PM My favorite damascus is Damasteel; I don't have their link right now but you can reach them through Brisa. Brisa also carries Wootz. Dennis at Brisa is a really nice fellow. www.brisa.multi.fi/start3.html (http://www.brisa.multi.fi/start3.html) Rade L Hawkins 02-11-2001, 10:41 PM CHECK WITH ED CAFFREY--HE CAN PUT YOU IN TOUCH WITH THE SUPPLIER OR IT MAY ALREADY BE ON HIS FORUM-----RADE MJBain 12-13-2001, 02:07 PM Check Brownell's. The carry atomized metal for mixing in there epoxy's BCB27 12-14-2001, 02:20 AM I think Crucible has powdered metal, but may be wrong. Brett dogman 12-14-2001, 11:03 PM I have a bunch of powdered metal under my grinder. Bring your broom and you can have as much as you want:) | |