View Full Version : plan comes together


Gary Mulkey
09-12-2001, 06:59 PM
I just finished my first attempt (successful) at heat treating 1095. After reading of some of the problems that some of you have had with 1095, I was very anxious. However with the tips and techniques that some of you gave me, I was successful with the heat treat. I was careful to take out all deep scratches down to 220 grit. Took the time to normalize each blade before attempting the hardening.

A special thanks to J.Loose. I used his specs on the heat treat with the best of results.

Thanks All!

Gary Mulkey