This is a standard hunter I make. Its from a 52100 roller bearing, I forged out. Specs are: Blade is 4 1/4", overall is 8 3/4", zone tempered and forging marks left in, Dove-tailed nickel silver boltsers, mosaic pins, stabilized atzelia handle and vine file work on top from behind the bolsters to the end, on top. Let me know what you guys think. Thanks, Charles

http://www.imagestation.com/picture/sraid26/pa86e1337771050b934a4d00229f02a4f/fe42c26b.jpg.orig.jpg

Nice work, great temper line and design, looks like a real work horse!

I wasn't logged in properly the first time, but it still posted? This is a standard hunter I make. It's from a 52100 roller bearing I forged out. Specs are: Blade is 4-1/4", overall is 8-3/4", zone tempered and forged marks left in, dovetailed nickel silver bolsters, mosaic pins, stabilized Atzelia handle and vine file work along the spine from behind the bolsters to the end. Let me know what you guys think. Thanks.

http://www.imagestation.com/picture/sraid26/pa86e1337771050b934a4d00229f02a4f/fe42c26b.jpg.orig.jpg

Visit my site: <a href="http://www.sauerknives.com" target="_blank">www.sauerknives.com</a>
Email me: charles@sauerknives.com

I do not forge but allways love a nice knife. I think knives made from bearings impresses me the most. It is awsome that you can make a knife out of such a piece of metal!...I like it alot

Thanks for the compliments guys. I'll try to post a few after the local show this weekend. The roller bearings are a bit of a pain, but my press at least smashes them out into a manageable billet. From there I decide to either hand forge or stock removal it. Have a lot to do, so thanks again.

Really nice looking knife.

Charles asked...
Why is the EzCode still included in my signature?

You can't use EzCode in the signature. You have to use HTML. Copy and paste the following as your signature. If you have any more computer related questions, drop by and see us at The Computer Center forum. We've got some sharp folks hanging around there that will be glad to help.

Here's the HTML code:


Visit my site: <a href="http://www.sauerknives.com" target="_blank">www.sauerknives.com</a>Email me: charles@sauerknives.com


That is all one long line. Just copy and paste the whole thing.