Not Exactly High Performance, But... [Archive] - The Knife Network Forums : Knife Making Discussions


The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > High-Performance Blades > Not Exactly High Performance, But... PDA View Full Version : Not Exactly High Performance, But... Jerry Hossom 10-30-2003, 01:57 PM It's one way to turn a $16 blade into a useful tool. I did a small tutorial on sharpening an Ontario machete my way. Done right, it's one of the most effective wood choppers you can own, and holds up to hard use a lot better than you might expect. http://hossom.com/sharp/ Bob Sigmon 10-30-2003, 07:24 PM Jerry, Great Tutorial!! And the pics are fantastic. You are the Edge Master! Bob Sigmon berettaman12000 11-07-2003, 10:30 AM Hey Jerry, that was really helpful! You told some time ago about doing edge work on machettes and I went out to the flea market and bought 20 at $5 each and done what you said and resold them for $10 ea. and have not had one unhappy customer! I do it for fun, otherwise, I would charge more. Thanks for the info!!