View Full Version : KN Class : : Making a slipjoint folder


  1. This is what we'll make together
  2. Two ways to square up your drill press
  3. Class "lesson" arrangement
  4. Step#1. Make the blade and spring/backspacer first
  5. Step #2. Make a tooling plate and fit the blade and back spring
  6. Step #3. Make your liners.
  7. Step #4. Make the nail nick
  8. Step #5. Make the bolsters and solder them to the liners
  9. The finished knife
  10. Step #6, finishing the knife.